Tim / Kevin, Hydro-boost brake option

MPTech

MPTech

Member # 032
GCC Member
Location
St. Louis (south county)
First Name
Mark
Last Name
Patterson
Ran across this on FFR site.
This is a Wilwood PB Hydroboost setup with an additional balancer option for adjusting front/rear bias.
Just sharing.

attachment.jpg
 
Thanks Mark! I think in the end I want power steering, so, may as well add brakes too eh? Think this would require the dreaded frame mod? Body removal?
 
Tim- I didn’t have to modify the frame. I have changed my my hydroboost with the body on… front wheel and elephant ear removed
 
How much is all of that and you are still going to use the PBR brakes? Put good Bear or Wilwood brakes on in and call it done. They will stop you. But to each their own. I look at these cars as a canvas and you can paint you're own picture any way you want. Just listing options.
 
That looks like a nice setup, similar to Rich's, I believe. That's the one I was looking at before I went with the one that came with my belt setup.
Confirm that the pressure is suitable for a Ford rack (GM pumps run a higher pressure). I assume it is since Breeze is selling it, but I had to install a pressure reducer on my GM Saginaw pump.
 
That's the kit that I used when I converted to power steering. If I had it to do over I would use epower steering unit. Cleaner set up and you can adjust how much power you want, highway versus parking lot.
 
You must log in or register to reply here.
Back
Top