Help putting body on and pizza run.

K

Keno50

Member #051
Location
Wildwood
First Name
Tom
Last Name
McGrath
Need some help putting my body on 10:00 this Sunday March 18th and then a pizza run to D'Angelos In Pacific.
I'm at 18301 Rathbun Hills Rd Wildwood, mo 63069 314-740-2009 it's easy to find. I'm off Allenton Rd which runs up behind Six Flags if your coming in on Hwy 44. From St. Charles etc. Hwy 100 to Melrose Rd. There's two (TAKE THE ONE ON THE LEFT) to Allenton Rd on the right and 3rd house on the right with a flag pole and Military Duce in a half in the drive way is me. Ranch style cedar house.
 
I'm IN! I talked to Tom earlier and suggested maybe a short cruise afterwards.
Hoping it's good weather: Partly Sunny, almost 60*, 0% chance of rain.
Tony? Taylor?
 
I would love to get away from working on this house. Unfortunately I have to get this thing done. It's taking all my free time now. I can't even get my car finished. :mad:
 
Yes I would like to watch this operation...so I will be there...Mark and Tim maybe link up and roar in together...we can discuss Saturday...Hope I am not hung over....
 
Tony, you planning on moving? If not...guess what...it will still be there Sunday evening when you get home! :p :D Ian, you and I can hook up, would be a little out of the way for Mark to come to us. Meet me at the QT on S. 94 at 9:30.
 
Oh my weather man must be drunk...37 here in LSL for a 9:10am Lift off....you are going in daily Driver, after careful consideration I am pulling the plug due to the weather SUCKS! Too darn cold for 80mph on Hwy 40....so I am out. Sounds like you have enough for the “body on” event. Sorry to miss it...FIRST DAY OF SPRING IS TUESDAY...temps will move up hopefully.
 
Mark, Tom and I were able to get the body on, and off, and on, and off....and On again to make some modifications to the front and rear cowl "lips" to clear Tom's custom dash and rear bulkhead. We think we have it figured out and Tom has some homework to do, but close to putting on and doing panel alignments. Then drive it in Gel Coat for a summer before it's off to paint. Thanks Tom and Maverick for having us over!
 
No, the thanks goes to Tim, Mark and Paul for taking time out of your Sunday to lend a hand. I'm actually finally seeing light at the end of the tunnel. Monday I'll get things trimmed up and parts ordered.

Thank you.
 
Proof:
20180318_130219.jpg 20180318_130225.jpg 20180318_130228.jpg
 
Had posted a thread link on the grommet installation...but, just saw Mark had already done so.
 
Last edited:
You must log in or register to reply here.
Back
Top