Search results

Welcome Jamie & Traci! If you are interested in joining us on the 2nd of August, I'm doing an open house garage party at my place in Mexico, MO. https://gatewaycobraclub.com/forum/threads/open-house-garage-party.8017/ Dave

Here is a kit similar to the tool in the video: https://a.co/d/0dF7lIn

See if this video helps:

The pipes just clear with the standard ramps. I may swap to longer Race Ramp ramps.

Paul, I reached out to BendPak, and as you suspected, they do not recommend making any modifications to the lift. I'll follow that advice and spend the ten minutes to change configurations when it is needed. Dave

Here you go, Paul. The platform sits on the cross beam and can be set in either of two positions (narrow, or wide). The bolt holes are 5/8" diameter and the beam is 2" wide boxed steel. I'm thinking of replacing the bolts with pins like these...

Thanks guys! The lift is set in the narrow configuration, but I'll need to move between narrow and wide frequently and wonder if I can use pins instead of bolts to secure the sliding platform in place. Any advice or experience with this?

My lift is in the shop!

My slab was poured in September. It's 5" thick, 3,000psi with rebar grid at 2' spacing. The slab sits on top of 4-10" of compacted stone base (4" at the front of the building and deeper as you go toward the rear of the building due to the slope of the site the building sits on). The slab has...

The name of the installer is Paul Pridgen, and it looks like he is in St. James.

I was told something similar by a concrete contractor: There are two types of concrete; cracked concrete, and concrete that will crack.

MP Distribution 1066 E Springfield Rd Sullivan, MO 63080